0086-573-87881860
No. 25, Weidong Team, Longlian Village, Yuanhua Town, Haining, Jiaxing, Zhejiang, China (Mainland)
Description of product:
Description | Pressure solar water heater |
Material of out tank | 0.4mm thickness color steel/ fluorine carbon steel |
Material of inner tank | Food grade 1.2mm thickness ,SUS304-2B stainless steel |
Tank insulating layer | 55mm 45kg/m³ high-density polyurethane foamed |
Inlet and outlet hole | Male G 1/2, 3/4 |
Max pressure | 0.6Mpa |
Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P≤0.005 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | εh=0.04-0.06(80C±5C) |
Idle sunning property parameters | Y=220~260m2.C/K |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket: | 1.5mm thickness Galvanized Steel |
Structure of tank: | 5 holes for air vent,water inlet and outlet,electric heater,Mag Rod |
Welding: | Argon arc welding |
Fastening pieces: | Made of stainless steel screw |
Absorber area | 2.125 m² |
Tube quantity | 15 tubes 58x1,800mm with heat pipe |
Tank capacity | 150L |
Sample show-1(SN-PCS12)
Compact pressurized solar water heater working principle
1.The pressurized water tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized water tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Heat pipe solar water heater features
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized water tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof .
8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Heat pipe
The other sample show
1-SN-PCS20
2-SN-PCS24
Advantage
1.The pressure of hot water is pressure of tap water directly ,you can enjoy more comfortable shower .
2.Hot water that we use flow in copper coil without transferring in tank directly ,so the water is more clean and healthy .
3.There is no need to wait , you can enjoy instant hot water at any time .
4.It is suitable for some area special with bad water quality such as hard water ,impurity water etc.We only need use high quality water in tank as a thermal source,refresh it during some time in interval.This will increase vacuum tube heat efficiency and in ease whole system life performane
5.Can be used all year round in the cold climate.
6.Simple structure, easy to assembly and install, diffuse flat plate reflector can be assembled easily with its module structure.
Our service
Fast response: Your inquiry will be replied within 24 hours via e-mail or online messenger.
Technical support: You have more than 7 years experience from SANENG SOLAR for product suggestion, installation guidance, market analysis, etc.
OEM & ODM: We welcome OEM & ODM requirements for solar collector, storage tank, installation frame, and even for some outsourcing equipment.
Sample checking: In spite of quality control in production, samples will be selected and installedto check prior to delivery.
Minimum order quantity: We offer sample sample manufacturing for customers to check VISION quality and service.
Shipping service: SANENG company offers to arrange goods shipment to abroad ocean port or inland site, and if necessary to make goods insurance, customs clearance, etc.
Import certificates: SANENG company offers to make Certificate Origin CO, FORM A, FORM E, FORM F, customs certification, etc.
Remarks
1.Lead-time:7-15 working days after receiving payment.
2.Payment Term:T/T, L/C, Western Union.
3.Warranty:5 years for the full system, 15 years for the vacuum tube,and 1year for accessories.
4.Trade Term: FOB, CFR and CIF.
we can customize according to customer's requirement
Contact: Mr. sunny Mobile: (00)86- Skype:sunny-yu77
